Now all you have to do is remove the rear bumper from your Chevrolet Avalanche, stick to the same procedure as for the front bumper.Unscrew the top brackets from the top of the trunk.While doing so, make sure un plug the rear license plate light and the reverse radar sensors if you are equipped with them.Take out the lower bindings below your Chevrolet Avalanche.Take out the side brackets in your wheel arches to make it more convenient to remove the bumper from your Chevrolet Avalanche.Remove the rear wheel arches of your Chevrolet Avalanche to access the side bumper side brackets.Start by executing the same first stage, that is, lift your Chevrolet Avalanche and take out your rear wheels in order to have an optimal working space to remove the bumper of your Chevrolet Avalanche serenely.For each stage to avoid repeating ourselves we will exclusively give you the broad outlines, read the part 1 if you have any uncertainties or questions for more details. How to remove the rear bumper from a Chevrolet AvalancheĪnd to conclude, whether or not the procedure is quite equivalent, we will check out the case of removing the rear bumper from your Chevrolet Avalanche. That’s it, you’ve seen all the steps of how to remove the front bumper from your Chevrolet Avalanche, to put it back in place stick to the steps in the opposite direction. Think of employing a carpet or other to prevent that it gets scratched by touching the ground. If it doesn’t come off, you most likely forgot a screw or a clip. Carefully remove the front bumper by first unclipping the sides.Remember to unplug the connection of the plate lighting and the distance control sensor if you have it.Now it’s time to go under your Chevrolet Avalanche to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.Then you will have to unscrew the screws that is at the rear of your mudguard and that locks the front bumper of your Chevrolet Avalanche on the sides.Dependant on your motor vehicle features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple. Take out the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Chevrolet Avalanche.Open the bonnet of your vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.If you want to be more comfortable, we recommend you to put your Chevrolet Avalanche on stands and to remove the front wheels to have a good access to the whole front bumper. Here are the guidelines you will have to stick to in order to disassemble the bumper of your Chevrolet Avalanche in good conditions: To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. So let’s commence our article content with the front bumper of your Chevrolet Avalanche.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |